Capabilities
The ability and the crew
to finish it
C & M Foundations has the skills and equipment to procure and finish all of your upcoming foundation projects — start to finish, with our own iron.
01 — Drilled Caissons
Drilled shafts, any ground
We have the ability and crew to install drilled caissons from 12 inches to 14 feet in diameter and over 100 feet deep, in clay, sand, rock and boulder-laden soils.
- 12 in to 14 ft finished shaft diameter
- Depths beyond 100 ft
- Slurry shoring, steel casing or dry hole method
- Cage fabrication, setting and concrete placement
02 — Direct Embedment
Poles set plumb, set fast
Where site conditions allow, direct embedment is the quickest path from hole to energized structure. We drill, set, plumb and backfill to spec with the same crew and the same standard as our drilled shaft work.
- Augered and cased embedment holes
- Setting, plumbing and alignment to survey
- Engineered backfill and compaction
- Distribution and transmission structures
03 — Pad & Pier Foundations
Anchor bolts where the drawing says
Tower and equipment foundations live and die on the bolt circle. We set templates to survey, tie steel, form and place concrete so the ironworkers behind us never lose a day.
- Anchor bolt cages set to tight tolerance
- Pier, spread and mat pad configurations
- Formwork, rebar and finishing self-performed
- Lattice tower, monopole and equipment support
04 — Slab-on-Grade
Flat work that holds up
We focus on industrial construction. That focus has led us to create the necessary tools, forms and equipment to produce high quality concrete structures in a volume-driven, yet safe work environment.
- Control buildings and equipment shelters
- Transformer and breaker pads
- Sub-grade prep, forming and reinforcement
- Finished and cured to industrial spec
Drilling Methods
Three ways to hold a hole open
The soil decides the method. We carry the tooling for all three so a change in ground conditions doesn't become a change order in the schedule.
Slurry Shoring
Mineral or polymer slurry keeps the shaft stable through caving sands and saturated ground, with concrete displacing the slurry on placement.
Steel Casing
Temporary or permanent casing advanced ahead of the tool for boulder-laden and unstable formations — and pulled clean during the pour.
Dry Hole
Where competent clay or rock stands on its own, the fastest and cleanest option — straight auger, inspect, cage and pour.
Our Iron
We own what we run
We maintain our own drills, excavators, loaders and lifting equipment to perform all aspects of the work associated with caissons, direct embedment, pad/pier foundations and slab-on-grade foundations.
Our experience and resources allow us to provide our customers with the best available construction methods. When a site throws something unusual at us, we can create and manufacture the tools and equipment to solve it.
- Company-owned drill rigs and augers
- Excavators, loaders and lifting equipment
- In-house tool and form fabrication
- Crews mobilized throughout the country
Safety
Satisfaction guaranteed,
with safety in mind
Our safety record is second to none — a TIRI of 0 since founding the company. We are 100% committed to a safe work environment, and that commitment is what lets us run a volume-driven operation without cutting a corner.
- TIRI of 0 since day one
- Daily job hazard analysis on every site
- Purpose-built tooling in place of improvised rigging
- Crews trained across every method we run
Project Gallery
From the field
Caissons, cages, bolt circles and finished foundations across cell tower, substation and powerline work.
Ready to price your foundations?
Send us plans, a bolt circle, or just a location and a date. We'll come back with a straight answer.
Request a Quote